I meant to post this earlier…
The B-Movie that gave my laptop its name!
I meant to post this earlier…
The B-Movie that gave my laptop its name!
Now that the World Cup is over and my Germans are rightful World champions, and since the Bundesliga season doesn’t start for another month, I figured I could spend some time on my Retrochallenge… whatever the Hell it is.
Last week’s small victory turned out to be a loss… the floppy drive in my Tandy 1500HD is toast. Since the hard drive is quite dead as well, I have no simple way of booting the laptop. This model didn’t have the TANDY EEPROM that many other models had, which usually contained a small MSDOS logical drive with Tandy’s DeskMate software. So, unless I can fix the floppy drive, it is unusable as a computer.
Speaking of floppies, I found a 10″ x 10″ x 10″ box full of ’em rotting away in a damp corner of the basement. Probably a good 200 disks easily, most of which were rendered useless by the damp. No real loss, as they were mostly Amiga MODs and BBS & internet downloads I’d since backed up to CD. I didn’t lose any original software disks, as they were at the top of the box and therefore spared the damp fate of the disks on the bottom.
Of those originals, 90 percent were late 80s/early 90s PC games… chief among them was Fire Hawk: Thexder II. One of my favourite games of that era, and the first PC game I ever bought!
So, I fired up Angry Red to see if any of the floppies still worked. In doing so, I took note of Angry Red’s specs.
Angry Red is running MS-DOS 5.0/Windows 3.1 and sports a 20MHz 386 w/387 Math coprocessor, 2Mb RAM on board (with 3 empty SIMM-like slots for proprietary RAM modules), 100Mb HD, and two ISA slots, 1 x 8- and 1 x 16-bit. The slots are currently occupied by a generic 28.8 modem and a 16-bit Adaptec SCSI card, the model of which escapes me for the moment. I wanted to replace the modem with an 8-bit Sound Blaster card (which would also add a game port), but the card is too long to fit. Ah well, I think I have an AdLib card or a twin gameport card somewhere in the lab…
As I suspected, Angry Red is saddled with slow-ass 8250 UARTs, which might hamper a future plan involving the serial ports.
I tooled around in DOS and Windows for a bit, mostly to refamiliarize myself with Windows 3.1. Using File Manager required a bit of an adjustment on my part. I’ve been spoiled by later, better file managers… even Windows Explorer looks good in comparison! Tonight’s project will be to connect a SCSI CDROM to the system so I can go through my old Night Owl CDs (et cetera). I’m looking specifically for tweaks and user interface options for Windows, perhaps a decent text editor and terminal program (w/zmodem) as well.
I found a program called Rooms which, from what I understand, creates virtual desktops (similar to some Xwindows managers) in Windows 3.1. I’ll try it out tonight to see if I can make use of it.
The rest of the evening was spent playing Fire Hawk. The game’s sound and background music sounded passable through the PC Speaker, but certainly not as good as it sounded through my old AdLib. I’ll have to do something about that…
While I have the original diskettes, I don’t seem to have the manual the game came with… which makes defeating the manual-based copy protection a random endeavour. Thankfully I had a copy of CopyWrite and Rescue (cracking programs) on one of the floppies I found in the box, so I was able to enjoy my favourite PC game again. Next up, Star Control!
I’ll report on tonight’s CDROM/Windows tweaking efforts tomorrow morning.
My blog host, motd.org, was down again last night, so I wasn’t able to publish anything.
I had a bit of good luck (or saving grace!) last night as I went to toss a few things into the trash. Just as I was about to toss my non-working Tandy 1500HD laptop into the bin, I noticed a heretofore unnoticed switch on the side of the machine… one that was labeled BACKLIGHT. One that was set to LOW instead of HI. Duurrrrrrrr…
I’ve had this machine apart more often than my Amiga 2000, yet I completely missed this switch. I brought the laptop back into the house, plugged it in, flicked the switch to HI, and powered it on. Damned if it didn’t work!
This adds a whole new dimension to my Retrochallenge. The 1500’s (XTA?) hard drive was dead when I bought the machine, but as far as I know, the floppy drive still works. I’ll test it tonight (Thursday), and will then consider what I want to do with the machine, and how to integrate it into the RC and my lab.
I also tracked down the manual for another piece of hardware in the lab, as well as a program that supports it. If I have time I’ll test it as well.
Will update tonight after work, assuming motd.org is up 😉
I found a bit of time in which to work on Angry Red last night, mostly to re-familiarize myself with the machine.
It’s obvious I’d done some work (software-wise) on the system, although I don’t remember what my overall plan was. Angry Red pre-dated my current project management system by a couple of years, so what few project notes I kept are scattered about on fast food napkins or scribbled on discarded printouts.
I vaguely remember installing Trumpet Winsock a few Retrochallenges ago, so I could dial in to my account at SDF. I remember being able to connect via PPP, but not getting any internet programs to work (gopher, telnet, browser). The project was probably shelved when life interfered and I was forced to drop out of that particular Retrochallenge (heh).
Of course, I won’t be able to dial out from my house, as we no longer have a phone line. But that’s the great thing about having a portable computer, I can dial out from elsewhere if need be. I might try to do just that later in the week, and troubleshoot the connection.
Speaking of connections, I dug out my old Xircom Parallel Port/Ethernet box from the depths. I’ve had it for about a decade but never used it. Hell, I don’t even remember why I bought it… probably for use on a computer I no longer have for a purpose long-forgotten. I did manage to find the drivers way back when, even burned them to a CD! Now, once I find that CD I’ll be able to use the unit with Angry Red.
More updates to come throughout the day.
(CJ’s note: Which didn’t happen, as MOTD was down all day yesterday)
I didn’t have time to spare for the RC this weekend. Too much going on.
My cat, Ethin, had to be put down Friday evening. His many health issues (Hypertrophic Cardiomyopathy, Diabetes, Megacolon, to name the worst) finally got the better of him, and it was time to end his suffering. At sixteen years old, he had a good run.
Ethin served as my Retrochallenge mascot for years. He’d always hop up in my lap whenever he saw me concentrating on a computer problem, and would usually try to bat at whatever hardware I was working on… which usually meant having to gather up jumpers and screws from the floor.
I’ll miss my little buddy.
While I did no actual work, I started making a long-term plan for my 386 portable, which some veteran RC’ers might remember as my Toshiba T5200/100, affectionately known as “Angry Red” due to its red gas-plasma display.
My ultimate goal is to turn Angry Red into a daily driver, able to do the mundane light-duty things I need, but also limited enough to pose a challenge and satisfy any retro-cravings. Interoperability with my other hardware (new and old) will be a must.
Despite not having PCMCIA ports, game ports, networking, or a sound card, and being saddled with a slow-ass 8250 UART (I believe) and requiring proprietary RAM, it’s still a useful machine and still very expandable.
(LOL, that has to go on record as the most blindly optimistic thing I’ve ever written…)
I’ll go into a little more detail later this evening if not tomorrow.
I’ve finally had a chance to read the other RCer’s blogs!
I’m pretty excited this time around… I have been waiting to see an S-100 machine in the RC! Not to mention a Sun3 system and a few Z80-based machines.
Love the Atari 8-bit stuff too.
I’m hoping to get my TRS-80 Model 4P’s hard drive going at some point (even if I don’t have time for it during the RC), as I’m wanting to develop for the machine, and a hard drive would be a handy thing indeed. Can’t be bothered with emulators.
I rescued the 1500HD’s power adapter from the scrap pile, and thankfully it was the same adapter required by my Tandy 2800HD.
The laptop booted into MS-DOS, but I wasn’t paying close enough attention to determine which version. If I remember correctly, it was running MS-DOS 5.0, but I’ll verify that later.
I did take a quick look to see which software was installed on the machine: MS-DOS, Windows 3.0, Telemate 4.x (my favourite DOS terminal program), some transfer programs for my Super Nintendo copiers, a few SNES ROMs and save games, and a few handy programs from PC Magazine’s DOS Power Tools series.
My mom had bought me a subscription to PC Mag way back in the early 90s (back when .com was known chiefly as a file extension and not part of a web address), and as a bonus perq they sent three floppies loaded with little programs and TSRs designed to make my MS-DOS experience that much easier.
Three PC Mag programs in particular stood out: Touch, Sweep, No, along with two from a friend: RAT,and Hexcalibur; which invariably ended up on each MS-DOS machine I owned (including the 2800HD).
Touch.com let you change a file’s date stamp. Don’t remember why I needed this, but I remember it was important on some level. I learned later that the unix command touch was different. There was also an improved version called Fondle.com, but I don’t remember the specifics. Probably for the best, as the metaphor was getting out of hand…
Sweep.com was cool. It would execute a command in every directory on your hard drive, and I believe subdirectories, too. I remember using it to rid my hard drive of those small, unneeded files when drive space was at a premium.
for example, you could run:
sweep del *.DIZ
to rid yourself of all those FILE_ID.DIZ files included in every damned archive you downloaded.
No.com would exclude certain files from the effects of another command. I don’t remember the exact syntax but I believe it went something like this:
no *.txt del *.*
which would exclude all files with the extension .txt from being deleted with everything else. It was far handier than selecting files manually using DOSSHELL or PathMinder.
I remember using it to purge the contents of my SNES ROM directory (DIZ files, scene docs, BBS ads, read mes, save games, realtime saves, SMC roms), apart from ROMs I’d converted to Game Doctor format (*.078). Very much a time-saver.
RAT.com, or Resident ASCII Table, was another favourite of mine. It’s a TSR program that was invoked by hitting the alt key twice, which then brought up a box displaying the values of each ASCII character. My friend Kevin introduced me to RAT when we were in our Grade 12 computer science class (and when I was still a Coco kid). I used the ASCII values to design title screens for our GWBasic program assignments.
and finally there was HC.com (Hexcalibur), my favourite Hex editor. This was another program Kevin introduced me to. We used to use it to change executable files on the school’s lab computers, in a teenage vandalism sort of way.
Changing (for example):
Olivetti Personal Computer
Spaghetti Personal Dinner
I don’t recall ever using HC for constructive purposes, I think I kept it around for nostalgic reasons.
Sigh. Now that was a trip down memory lane…
Anyway, I’ll post some pics of the three laptops when I get home from work.
I went to fire up my Tandy 2800HD laptop last night to see if it still worked… and I don’t seem to have the power adapter for it!
Ah well, no big deal. If I remember correctly, it uses the same adapter as the 1500HD laptop I just tossed on the recycling pile. Will have to test it out tonight once I get home from work.
Speaking of Tandy computers, I found my Model 100 in my writing desk as I prepared to put the desk into storage. Nice stroke of luck, that! I’ll likely use the M100 to document all my RC entries from here on in.
I didn’t have time for much more than that last night. I did a bit of contemplating regarding my 386 laptop (expansion upgrades, future plans, hacking it, etc) and came to the conclusion I could really trick this thing out with the right equipment and with minimal financial outlay.
More on that later.
Aaaaaaaargh we’re off!
Today was spend playing with my old 386 portable (as opposed to a new 386 portable?), ensuring it works. It does.
I dug it out of the depths while taking stock of the machines left in the lab… it’ll probably do all the heavy lifting for the duration of the RC.
I also found several Tandy computers I’d largely forgotten about: a Tandy 1000sx, a 1000rl, a TL2, and two laptops: a 2800hd and a 1500hd (which is dead). No monitors, though.
Found a couple of interesting parallel port peripherals, too, which I will share with you later in the week.
The best thing I found today, the thing I’m most excited about, was the manual and driver diskette for my TRS-80 model 4P’s external hard drive! The drivers are from a third party company and are supposedly an improvement over Radio Shack’s drivers.
Hopefully I can get the ancient 70 meg drive to spin up…
A recent Twitter post from UrbanCamo reminded me that this year’s Retrochallenge is coming up in a month-and-a-half!
I really want to enter, but I’m leery of doing so. The missus and I are busy packing up the house so we can renovate (then sell), and as such most of my computer equipment et cetera is boxed up and in storage. There’s precious little left in the lab, mostly stuff I’ve never used, broken or damaged equipment, or things I’ve forgotten about.
Much of the equipment left over is of an appropriate vintage that they could be used in the Retrochallenge. Hmmm…
It’s tempting to enter the RC using “the mess” as my project. The idea of using whatever’s in the pile, whatever I can salvage and throw together, and making it all work somehow really appeals to me.
Problem is, we don’t have any form of internet connectivity at home. We cancelled our landline as well as our high speed internet earlier in the year because of our renovations, so I’ll have no immediate way of posting my progress.
Another challenge! I’m liking this more and more!
Lastly, most (if not all) my disks and manuals are boxed up and in storage as well, limiting me to whatever stray disks are still lying around, and whatever is on the old hard drives of the machines still lingering in the lab.
OK, I’m sold.
I’m going to enter the Retrochallenge, my theme being “Working With Whatever’s Left”.